French Tip Tool

1. Apply a thin strip of Ezmio One Step Gel polish onto the silicon tip. For longer nails or a deeper French tip, apply more polish to form a square shape on the silicon
2. Position your nail at a 40-degree angle and gently press it into the silicon head, starting from the bottom where the polish meets the silicon. Move your finger from side to side to ensure coverage of the nail's edges
3. If the sides of your nails are not fully covered or if you desire a thicker French tip, reposition your nail into the silicon at an angle to reach both sides
4. If excess polish accumulates, press your nail into a clean area of the silicon to remove it
5. Once the desired look has been achieved, cure for 60 seconds in your Ezmio Nail Lamp
6. Complete the process by applying a coat of our Optional Top Coat for a smooth finish
7. Tip: Don't worry if you make a mistake. With one step gel, simply wipe off the polish from your nails using a lint free wipe before curing and begin again. Practice makes perfect!

Using a lint free wipe with 100% isopropyl alcohol, wipe away any gel from the silicone and leave to air dry before storing. This will effectively remove gel and buildup while also sanitizing your French Tip Tool. To maintain quality and hygiene, we recommend cleaning your French Tip Tool before and after each manicure.

Silicone, Plastic